|
DSpace at Transilvania University >
Mechanical Engineering >
COMAT 2024 >
Please use this identifier to cite or link to this item:
http://hdl.handle.net/123456789/2778
|
| Title: | Study Regarding the Influence of the Build Plate Temperature and the Filament Color on the Tensile Strength of FDM Printed PLA Specimens |
| Authors: | Turiac, R. R.
Gheorghe, I.S.
Ardeljan, D.
Băcescu, N. |
| Keywords: | FDM (fused deposition modeling)
build plate temperature
PLA (polylactic acid)
filament color
tensile strength |
| Issue Date: | Oct-2024 |
| Publisher: | Transilvania University Press of Braşov |
| Citation: | http://scholar.google.ro/ |
| Series/Report no.: | COMAT 2024;115-120 |
| Abstract: | This study investigates the effect of the build plate temperature on the tensile strength of PLA products manufactured by FDM 3D printing. Tensile tests were conducted on specimens printed at 40°C, 60°C, 80°C, and 100°C using different colored PLA filaments (natural, black, red, and gray) aiming to analyze the combined influence of temperature and pigment. Results show that higher bed temperatures enhance interlayer adhesion, improving mechanical strength, but also increase the risk of deformation. The research provides recommendations for optimizing the printing parameters, contributing to the development of more sustainable and efficient 3D printing techniques for PLA. |
| URI: | http://hdl.handle.net/123456789/2778 |
| ISSN: | 2457-8541 |
| Appears in Collections: | COMAT 2024
|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
|
