|
DSpace at Transilvania University >
Mechanical Engineering >
COMAT 2012 >
Please use this identifier to cite or link to this item:
http://hdl.handle.net/123456789/1556
|
| Title: | GEOMETRICAL OPTIMIZATION OF AN EXTRUSION TOOL USED FOR AUTOMOTIVE DOOR’S SEALING SYSTEM USING CFD METHODS |
| Authors: | C. Astalosch, C.G. Atanasiu |
| Keywords: | TPV-E
PP
CFD
XFlow
extrusion die
material flow
geometrical optimisation |
| Issue Date: | 18-Oct-2012 |
| Publisher: | LUX LIBRIS PUBLISHING HOUSE |
| Citation: | http://scholar.google.ro/ |
| Series/Report no.: | COMAT 2012; |
| Abstract: | Purpose of modeling method with a CFD(Computational Fluid Dynamics)onducted in this paper is to study the
internal geometry of the extrusion tool for the inner waist belt of the car door. Thus critical areas of material flow were
identified and geometrically optimized before physical execution of the tool.
The combination of materials used on the inner of the door parapet is made of polypropylene (TABOREN PC T30 33) for the
rigid attachment to the door, and a vulcanized thermoplastic elastomer (Santoprene 121-67 W175), for the elastic contact
areas with the interior panel and side window of the door.
XFlow choice of modeling software and working method has been shown to be correct, the results can be validated through |
| URI: | http://hdl.handle.net/123456789/1556 |
| ISBN: | 978-973-131-162-3 |
| Appears in Collections: | COMAT 2012
|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
|
